Friday, February 24, 2012

Number of Jacks | Modular Wall Plates



The first decision you must make when using modular wall plates is how many jacks you want in each wall plate. Each opening in the wall plate can hold a different type of jack for a different type of cable media, if necessary. Additionally, each jack must be served by its own cable, and at least one of those should be a four-pair, 100 ohm, UTP cable.
The number of jacks a plate can have is based on the size of the plate. Fixed-design wall plates mainly come in one size. Modular plates come in a couple of different sizes. The smallest size is single-gang, which measures 4.5 high and 2.75 wide. The next largest size is called double-gang, which measures 4.5 by 4.5 (the same height as single-gang plates but almost twice as wide). There are also triple- and quad-gang plates, but they are not used as often as single- and double-gang plates. Figure 1 shows the difference between a single- and double-gang wall plate.

 
Figure 1: Single- and double-gang wall plates
Each manufacturer has different guidelines about how many openings for jacks fit into each type of wall plate. Most manufacturers, however, agree that six jacks are the most you can fit into a single-gang wall plate.
With the advent of technology and applications such as videoconferencing and fiber-to-the-desktop, users need more jacks and different types of cabling brought to the desktop. You can bring Category 3, Category 5e, or Category 6 UTP cable, fiber-optic and coaxial cable all to the desktop for voice, data, and video with 6-, 12- and 16-jack wall plates.

1 comment: