Showing posts with label Installation. Show all posts
Showing posts with label Installation. Show all posts

Wednesday, February 8, 2012

Wall Plate Design and Installation Issues


When you plan your cabling system installation, you must be aware of a few wall plate installation issues to make the most efficient installation. The majority of these installation issues come from compliance with the ANSI/TIA-570-B (for residential) and ANSI/TIA-568-C.1 (for commercial installations) telecommunications standards. You'll have to make certain choices about how best to conform to these standards based on the type of installation you are doing. These choices will dictate the different steps you'll need to take during the installation of the different kinds of wall plates.
Warning 
The National Electrical Code dictates how various types of wiring (including power and telecommunications wiring) must be installed, but be aware that NEC compliance varies from state to state. The NEC code requirements described should be verified against your local code requirements before you do any structured cable system design or installation.
The main design and installation issues you must deal with for wall plates are as follows:
  • Manufacturer system
  • Wall plate location
  • Wall plate mounting system
  • Fixed-design or modular plate
In this section, you will learn what each of these installation issues is and how each will affect your cabling system installation.

Manufacturer System

There is no "universal" wall plate. Hundreds of different wall plates are available, each with its design merits and drawbacks. It would be next to impossible to detail every type of manufacturer and wall plate, a few examples of the most popular types. The most important thing to remember about using a particular manufacturer's wall plate system in your structured-cabling system is that it is a system. Each component in a wall plate system is designed to work with the other components and, generally speaking, can't be used with components from other systems. A wall plate system consists of a wall plate and its associated jacks. When designing your cabling system, therefore, you must choose the manufacturer and wall plate system that best suits your present and future needs. It is best to stay with one common wall plate system design for all of the workstation's outlets.

Wednesday, January 25, 2012

Components of a Typical Installation



Just like copper-based cabling systems, fiber-optic cabling systems have a few specialized components, including enclosures and connectors.

Fiber-Optic Enclosures

Because laser light is dangerous, the ends of every fiber-optic cable must be encased in some kind of enclosure. The enclosure not only protects humans from laser light but also protects the fiber from damage. Wall plates and patch panels are the two main types of fiber enclosures. 
When most people think about a fiber enclosure, a fiber patch panel comes to mind. It allows connections between different devices to be made and broken at the will of the network administrator. Basically, a bunch of fiber-optic cables will terminate in a patch panel. Then, short fiber-optic patch or interconnect cables are used to make connections between the various cables. Figure 1 shows an example of a fiber-optic patch panel. Note that dust caps are on all the fiber-optic ports; they prevent dust from getting into the connector and interfering with a proper connection.

 
Figure 1: An example of a fiber-optic patch panel
In addition to the standard fiber patch panels, a fiber-optic installation may have one or more fiber distribution panels, which are very similar to patch panels, in that many cables interconnect there. However, in a distribution panel (see Figure 2), the connections are more permanent. Distribution panels usually have a lock and key to prevent end users from making unauthorized changes. Generally speaking, a patch panel is found wherever fiber-optic equipment (i.e., hubs, switches, and routers) is found. Distribution panels are found wherever multifiber cables are split out into individual cables.

 
Figure 2: A sample fiber-optic distribution panel

Fiber-Optic Connectors

Fiber-optic connectors are unique in that they must make both an optical and a mechanical connection. Connectors for copper cables, like the RJ-45 type connector used on UTP, make an electrical connection between the two cables involved. However, the pins inside the connector only need to be touching to make a sufficient electrical connection. Fiber-optic connectors, on the other hand, must have the fiber internally aligned almost perfectly in order to make a connection. The common fiber-optic connectors use various methods to accomplish this