Showing posts with label Copper. Show all posts
Showing posts with label Copper. Show all posts

Saturday, October 29, 2011

Why Pick Copper Cabling?



Copper cabling has been around and in use since electricity was invented. And the quality of copper wire has continued to improve. Over the past 100 years, copper manufacturers have developed the refining and drawing processes so that copper is even more high quality than when it was first used for communication cabling.
High-speed technologies (such as 155Mbps ATM and 10 Gigabit Ethernet) that experts said would never run over copper wire are running over copper wiring today.
Network managers pick copper cabling for a variety of reasons: Copper cable (especially UTP cable) is as inexpensive as optical fiber and easy to install, the installation methods are well understood, and the components (patch panels, wall-plate outlets, connecting blocks, etc.) are inexpensive. Further, UTP-based equipment (PBX systems, Ethernet routers, etc.) that uses the copper cabling is much more affordable than comparable fiber equipment.
Note 
The main downsides to using copper cable are that copper cable can be susceptible to outside interference (EMI), copper cable provides less bandwidth than optical fiber, and the data on copper wire is not as secure as data traveling through an optical fiber. This is not an issue for the typical installation.
Table 1 lists some of the common technologies that currently use unshielded twisted-pair Ethernet. With the advances in networking technology and twisted-pair cable, it makes you wonder what applications you will see on UTP cables in the future.
Table 1: Applications That Use Unshielded Twisted-Pair Cables 
Application
Data Rate
Encoding Scheme[*]
Pairs Required
10Base-T Ethernet
10Mbps
Manchester
2
100Base-TX Ethernet
100Mbps
4B5B/NRZI/MLT-3
2
100Base-T4 Ethernet
100Mbps
8B6T
4
1000Base-T Gigabit Ethernet
1000Mbps
PAM5
4
10GBase-T Gigabit Ethernet
10,000Mbps
PAM16/DSQ128
4
100Base-VG AnyLAN
100Mbps
5B6B/NRZ
4
4Mbps Token Ring
4Mbps
Manchester
2
16Mbps Token Ring
16Mbps
Manchester
2
ATM-25
25Mbps
NRZ
2
ATM-155
155Mbps
NRZ
2
TP-PMD (FDDI over copper)
100Mbps
MLT-3
2
[*]Encoding is a technology that allows more than one bit to be passed through a wire during a single cycle (hertz).

Sunday, October 23, 2011

Types of Copper Cabling



Pick up any larger cabling catalog, and you will find myriad types of copper cables. However, many of these cables are unsuitable for data and voice communications. Often, cable is manufactured with specific purposes in mind, such as audio, doorbell, remote equipment control, or other low-speed, low-voltage applications. Cable used for data communications must support high-bandwidth applications over a wide frequency range. Even for digital telephones, the cable must be chosen correctly.
Many types of cable are used for data and telecommunications. The application you are using must be taken into consideration when choosing the type of cable you will install.Table 1 lists some of the historic and current copper cables and common applications run on them. With the UTP cabling types found in Table 1, applications that run on lower-grade cable will also run on higher grades of cable (for example, digital telephones can be used with Category 3, 4, 5, 5e, 6, or 6A cabling). Category 1, 2, 4, and 5 are no longer recognized by ANSI/TIA-568-C and should be avoided, but they are described below for historical purposes.

Table 1: Common Types of Copper Cabling and the Applications That Run on Them 
Cable Type
Common Applications
UTP Category 1 (not supported by ANSI/TIA-568-C)
Signaling, doorbells, alarm systems
UTP Category 2 (not supported by ANSI/TIA-568-C)
Digital phone systems, Apple LocalTalk
UTP Category 3
10Base-T, 4Mbps Token Ring
UTP Category 4 (not supported by ANSI/TIA-568-C)
16Mbps Token Ring
UTP Category 5 (not supported by ANSI/TIA-568-C)
100Base-TX, 1000Base-T
UTP Category 5e
100Base-TX, 1000Base-T
UTP Category 6
100Base-TX, 1000Base-T
UTP Category 6A
100Base-TX, 1000Base-T, 10 Gigabit Ethernet
Multi-pair UTP Category 3 cable
Analog and digital voice applications; 10Base-T
25 pair UTP Category 5e cable
10Base-T, 100Base-T, 1000Base-T
Shielded twisted-pair (STP or U/FTP)
4Mbps and 16Mbps Token Ring
Screened twisted-pair (ScTP or F/UTP)
100Base-TX, 1000Base-T, 10 Gigabit Ethernet
Coaxial RG-8
Thick Ethernet (10Base-5), video
Coaxial RG-58
Thin Ethernet (10Base-2)
Coaxial RG-59
CATV (community antenna television, or cable TV)
Coaxial RG-6/U
CATV, CCTV (Closed Circuit TV), satellite, HDTV, cable modem
Coaxial RG-6/U Quad Shield
Same as RG-6 with extra shielding
Coaxial RG-62
ARCnet, video, IBM 3270